Vehicle Repair Guides

One of the most serious issues that can happen to your gmc sierra s engine is if it ends up with low oil pressure. If it is not reset the system will be unable to properly track when your next oil change is due.

How To Reset Your Change Engine Oil Light 1999 2006 Chevy Silverado Gmc Sierra Youtube

Follow the instructions below to reset the engine oil life system on your gmc sierra.

Gmc sierra check engine light after oil change. The check engine light comes on when the engine control unit or the transmission control unit has detected a fault in the engine or transmission system. Step 2 press the gas pedal three times within five seconds. It will flash twice to confirm that the system has been reset.

When the oil pressure light on it should be assumed that the engine locking up is imminent. Ever since i got my oil change the friday before easter my check engine oil level message seems to pop on every morning. Turn the ignition to the on position and wait for the dash lights to illuminate.

It will only occur when there is a problem with your engine. We advise not running the engine until the issue can be properly diagnosed. Wait for the oil light on your dash to blink for five seconds and then shut off.

Even though after checking my oil lvl is maybe a 1 4qt low and i make that out to be whatever is still in the engine after turning the motor off. Low oil pressure will cause the engine to seize up. If your check engine light is on the easiest way to diagnose this problem is to check your trouble code memory with an obd2 scanner.

Turn the ignition key to the on position. The check engine light will not light up if there is a scheduled service. If it does not do this start over with step 1.

Don t start the engine. Look to see if the oil change light is flashing. The oil change light reset gmc sierra 1500 2008 2009 2010 2011 2012 2013 will need to be performed after every oil change.

Our cardinale gmc service technicians can replace your spark plugs and reset your vehicle s computer. A diagnostic test can determine if the spark plugs are the reason the check engine warning light has come on. If your vehicle s oxygen sensor is faulty it may trigger the check engine to come on.

Press the vehicle information button repeatedly until you see remaining oil life on the display. The oil life display must be reset after each oil change. Push the accelerator pedal all the way down to the floor and release it three times within 5 seconds.